Update: Maglev elevator prototype moves mankind closer to mile-high buildings

MULTI model 1 (c) ThyssenKrupp

ThyssenKrupp unveiled its 1:3 scale model last week at its Innovation Center in Gijon, Spain. The mock up features 32-foot shafts. Photo courtesy of ThyssenKrupp.

Back in May we wrote about a cable-free elevator system called MULTI that is poised to become the first breakthrough in elevator technology since the safety brake was invented 162 years ago. Just as the safety brake paved the way for the construction of modern skyscrapers, the recent unveiling of a fully-functional model of a cable-free MULTI elevator has taken mankind one step closer to mile-high skyscrapers …

German-based ThyssenKrupp is perfecting its cable-free MULTI elevator that uses the same magnetic levitation transportation technology, known as Maglev, as high-speed trains in Asia and Europe.

The system essentially levitates elevators by leveraging magnets in the car that repel opposing magnets along the track, causing the car to hover. A separate set of coils along the track pushes and pulls the car in its intended direction, resulting in a faster climb to higher levels of a building with far less friction and resistance. A rotating section of rail that can shift the direction of the moving magnetic field allows the car to also move across the building horizontally.

Instead of ropes, MULTI uses magnetic levitation technology and linear motors to travel 60-feet per second, both vertically and horizontally.

The successful testing of these Maglev-powered elevators will open the door to the construction of taller buildings. Traditional elevator cables currently can’t support both the elevator car and their own weight beyond 2,000 feet high — which is why passengers traveling to the highest floors of skyscrapers such as the Empire State Building must switch elevators as they get closer to the top.

The 761-foot-high concrete MULTI elevator test tower constructed in Rottweil, Germany, will be completed by the end of 2016. Photo courtesy of ThyssenKrupp.

The 1:3 scale model features two 32-foot shafts and four cabs, and it was revealed at the company’s Innovation Center in Gijon, Spain one year after the MULTI concept was first announced.

The mock-up also puts the company a step closer to completing its full-size test tower for the MULTI elevator. The 761-foot-high concrete test tower in Rottweil, Germany will be completed by the end of 2016.

“Our research and development team is right on track to realize this cutting-edge transport technology,” ThyssenKrupp Elevator CEO Andreas Schierenbeck said in a statement. “MULTI will be our answer to tomorrow’s challenges. As the nature of building construction evolves, it is also necessary to adapt elevator systems to better suit the requirements of buildings and high volumes of passengers.”

An overhead view of the the MULTI elevator concrete test tower. Photo courtesy of ThyssenKrupp.

 

This post was written by Justin Rice and Suffolk Construction’s Vice President of Marketing and Communications Dan Antonellis. Justin can be reached at jrice@suffolk.com or follow him on Twitter at @JustinAlanRiceDan can be reached at dantonellis@suffolk.com. Connect with him on LinkedIn here and follow him on Twitter at @DanAntonellis.

Leave a Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Pingbacks & Trackbacks